Forex News Trading Plans for Week 36, Aug 30 – Sep 5 2015


⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯​

Forex News Gun Trade Plan​

Canada Employment Change ⋯ 8:30am NY time (Friday, September 4)

⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯​

Traded pairExpected figureDeviation trigger
CADJPY2.0 (k)±20.0 (k)
BuyCADJPYif actual figure is or is above22.0 (k)
SellCADJPYif actual figure is or is below-18.0 (k)

Expected move during first 30 minutes after the release is 30 pips or more.


⋯⋯⋯⋯⋯ FNG Configuration ⋯⋯⋯⋯⋯​

Release name in FNG client: STCA Canada Net Change in Labo

Clicks: first row is for Sell CADJPY button, second one is for Buy CADJPY button:​



⋯⋯⋯⋯⋯ Detailed Trade Plan ⋯⋯⋯⋯⋯​

1. Start trade terminal
- Open your trade terminal and open an order sending dialog with Buy and Sell buttons.​
- Select CADJPY pair.​
- Set your lot size - use your constant risk level on balance.​

2. Start Forex News Gun client
- Open your Forex News Gun client ( and ) and click 'Connect...'.​
- Drag the FNG window aside in order to make trade terminal's Buy and Sell buttons visible.​

3. Set a click
- Click the 'Set Click' button in the row of Canada Employment Change.​
- Double click on first row's 'Range To' cell. Type '-18.0' and hit Enter.​
- Click first row's 'Click Location' button.​
- Drag the mouse cursor over the terminal's Sell button but don't click. We just show FNG where it is by pressing 'S' key while mouse cursor is over the Sell button. You will see the screen coordinates appearing in the FNG client.​
- Double click on second row's 'Range From' cell. Type '22.0' and hit Enter.​
- Drag the mouse cursor over the terminal's Buy button but don't click. Press 'S' key there to register button location in FNG client.​
- Click OK on this 'Set Clicks' window​

4. Keep trading environment intact
- Make sure that your pc, trade terminal and FNG client is running at the time of the release: Friday, September 4, 8:30am NY time.​
- Make sure that trade terminal's Buy and Sell buttons are visible at that time in order to catch screen clicks from FNG client.​

Now you have an automated news trading entry environment that will enter the market in a fraction of a second if this release figure hits the deviation. Nevertheless, don't forget to be at the PC at the time of the release in order to manage your position and to take that pips on the first spike that lasts no longer than several minutes.

I cannot tell you where to exit in relation to your entry, because entries during news vary greatly, due to different spreads, slippage, and other factors. For this reason, it’s extremely important that you review historical charts for Canada Employment Change, where the same deviation of at least 20.0 occurred. Click here to see such history: Canada Employment Change history of charts.

If the release figure doesn't hit the deviation then FNG client won't click so you can either close it or set the next release. In this case don't forget to change currency pair if needed according to the new release details. Don't be surprised if most of the releases don't trigger. This is a conservative strategy and according to my statistics only every 4th or 5th release opens a position by hitting the deviation.

You can try to make money "while you sleep" with this. To do that, set it up on stable computer or server with stable internet connection, and pre-set your stop/loss and take/profit targets with your broker. As long as the platform and FNG remain open, your trade will be executed and exited automatically.

To get even more creative with FNG, when setting up clicks, you can set up first click instantly on let’s say "Buy". Then you can set up second click with let’s say 20 minutes delay on let’s say "Sell" to automatically close your buy trade 20 minutes later. To do that, simply put 20 into the MM field next to the second click, and identify the "Sell" location. HH stands for hours. MM stands for minutes. SS stands for seconds. MS stands for milliseconds. The software will delay any click by your specified desired time parameters.

Due to so many releases not hitting the specified parameters, and due to them being released at such different time frames, being able to set it up, and leave it on auto-pilot may be attractive to some people, though it will be more risky.

⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯
⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯​

Forex News Gun Trade Plan​

USA Nonfarm Payroll ⋯ 8:30am NY time (Friday, September 4)

⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯​

Traded pairExpected figureDeviation trigger
USDJPY220 (k)±75 (k)
BuyUSDJPYif actual figure is or is above295 (k)
SellUSDJPYif actual figure is or is below145 (k)

Expected move during first 15 minutes after the release is 50 pips or more.


⋯⋯⋯⋯⋯ FNG Configuration ⋯⋯⋯⋯⋯​

Release name in FNG client: US NonFarm Payrolls

Clicks: first row is for Sell USDJPY button, second one is for Buy USDJPY button:​



⋯⋯⋯⋯⋯ Detailed Trade Plan ⋯⋯⋯⋯⋯​

1. Start trade terminal
- Open your trade terminal and open an order sending dialog with Buy and Sell buttons.​
- Select USDJPY pair.​
- Set your lot size - use your constant risk level on balance.​

2. Start Forex News Gun client
- Open your Forex News Gun client ( and ) and click 'Connect...'.​
- Drag the FNG window aside in order to make trade terminal's Buy and Sell buttons visible.​

3. Set a click
- Click the 'Set Click' button in the row of USA Nonfarm Payroll.​
- Double click on first row's 'Range To' cell. Type '145' and hit Enter.​
- Click first row's 'Click Location' button.​
- Drag the mouse cursor over the terminal's Sell button but don't click. We just show FNG where it is by pressing 'S' key while mouse cursor is over the Sell button. You will see the screen coordinates appearing in the FNG client.​
- Double click on second row's 'Range From' cell. Type '295' and hit Enter.​
- Drag the mouse cursor over the terminal's Buy button but don't click. Press 'S' key there to register button location in FNG client.​
- Click OK on this 'Set Clicks' window​

4. Keep trading environment intact
- Make sure that your pc, trade terminal and FNG client is running at the time of the release: Friday, September 4, 8:30am NY time.​
- Make sure that trade terminal's Buy and Sell buttons are visible at that time in order to catch screen clicks from FNG client.​

Now you have an automated news trading entry environment that will enter the market in a fraction of a second if this release figure hits the deviation. Nevertheless, don't forget to be at the PC at the time of the release in order to manage your position and to take that pips on the first spike that lasts no longer than several minutes.

I cannot tell you where to exit in relation to your entry, because entries during news vary greatly, due to different spreads, slippage, and other factors. For this reason, it’s extremely important that you review historical charts for USA Nonfarm Payroll, where the same deviation of at least 75 occurred. Click here to see such history: USA Nonfarm Payroll history of charts.

If the release figure doesn't hit the deviation then FNG client won't click so you can either close it or set the next release. In this case don't forget to change currency pair if needed according to the new release details. Don't be surprised if most of the releases don't trigger. This is a conservative strategy and according to my statistics only every 4th or 5th release opens a position by hitting the deviation.

You can try to make money "while you sleep" with this. To do that, set it up on stable computer or server with stable internet connection, and pre-set your stop/loss and take/profit targets with your broker. As long as the platform and FNG remain open, your trade will be executed and exited automatically.

To get even more creative with FNG, when setting up clicks, you can set up first click instantly on let’s say "Buy". Then you can set up second click with let’s say 20 minutes delay on let’s say "Sell" to automatically close your buy trade 20 minutes later. To do that, simply put 20 into the MM field next to the second click, and identify the "Sell" location. HH stands for hours. MM stands for minutes. SS stands for seconds. MS stands for milliseconds. The software will delay any click by your specified desired time parameters.

Due to so many releases not hitting the specified parameters, and due to them being released at such different time frames, being able to set it up, and leave it on auto-pilot may be attractive to some people, though it will be more risky.

⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯
⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯​

Diamonds Trading Signals Trade Plan​

USA Nonfarm Payroll ⋯ 8:30am NY time (Friday, September 4)

⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯​

Traded currency pairUSDJPY
Initial spike duration limit30 seconds
Initial spike price action threshold25 pips
Triggering retracement percentage30 %
Retracement duration limit90 seconds
Maximum trade hold time after release15 minutes
Stop loss15 pips
Take profit15 pips
Maximum spread3 pips


  1. Set up single click execution on your broker platform, and if possible, pre-determine default stop/loss and default take/profit to 15 pips, so that when you click to execute your order, your platform will automatically set your stop/loss and take/profit at 15 pips from your entry price. Do not try this with brokers that don’t offer single click execution.

    If your platform does not allow to pre-determine default stop/loss and take/profit, then after entering the trade, simply set the stop/loss and take/profit points manually.

  2. Pull up either tick, 1-second, 3-second, or 5-second chart, and at 08:29:45am, so 15 seconds before the announcement, start paying very close attention to the price action of USDJPY on your chart.

  3. If between 08:30:00am and 08:30:30am, so during the first 30 seconds after the report, you see USDJPY move up or down by 25 pips or more, then enter in the direction of the initial spike at the very first 30% retracement if it occurs in 90 seconds from release time (till 08:31:30am) – and if spread at the time of your entry is at 3 pips or less. Set stop/loss at 15 pips, and set take/profit at 15 pips.

    The retracement will happen within seconds. Don’t draw anything on your chart, and don’t try to get a perfect entry. As soon as you see approximately 30% retracement on your chart, compared to the initial spike, click to enter without any hesitation.

    If the move either up or down was less than 25 pips during the first 30 seconds, then the actual number of the report did not generate sufficient interest in the market, and you simply skip the trade. If your spread at the time of desired entry is more than 3 pips, then skip the trade.

  4. If by 08:45:00am, so 15 minutes after the report release, neither your stop/loss nor your take/profit points were hit, then close the trade automatically at market price of the time.


Previous Example: on December 7 2012, at 8:30am, USA Nonfarm Payroll number was released, so in the first 12 seconds, the price of USDJPY spiked up by 45.2 pips from 82.321 to 82.773. Then price started retracing, and within about 60 seconds retraced to 30% level of 82.637. So you would Buy at 82.637, set a stop/loss at 82.487, and set a take/profit at 82.787. 3 minutes after the report the take/profit was hit yielding 12.0 pips of profit, given that your spread at the time of the entry was at exactly 3 pips.


Be patient, and do at least 20 "second wave" trades, before getting frustrated and quitting.

Once you become good at it, you will be able to win on average 7 to 8 out of 10 trades.

Keep win to loss ratio at 1:1. Tweak it only after you are consistently profitable with 1:1.

Remember, it does not matter whether you make or lose 10 pips or 100 pips on a trade. What matters is how much money you make or lose on a trade. When risking 10 pips, simply put up 10 times more lots than you would when you risk 100 pips, and at the end you will make or lose the same amount of money. Yes, spread to pips targeted ratio matters, but these news "second wave" moves have such high probability of success that they somehow make up for the very high spread to pips targeted ratio (2 to 10), which is a small miracle in itself.


⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯
⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯​

Forex News Gun Trade Plan​

Canada Ivey PMI ⋯ 10:00am NY time (Friday, September 4)

⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯​

Traded pairExpected figureDeviation trigger
USDCAD53.5±3.0
BuyUSDCADif actual figure is or is below50.5
SellUSDCADif actual figure is or is above56.5

Expected move during first 30 minutes after the release is 20 pips or more.


⋯⋯⋯⋯⋯ FNG Configuration ⋯⋯⋯⋯⋯​

Release name in FNG client: Canada Ivey PMI

Clicks: first row is for Buy USDCAD button, second one is for Sell USDCAD button:​



⋯⋯⋯⋯⋯ Detailed Trade Plan ⋯⋯⋯⋯⋯​

1. Start trade terminal
- Open your trade terminal and open an order sending dialog with Buy and Sell buttons.​
- Select USDCAD pair.​
- Set your lot size - use your constant risk level on balance.​

2. Start Forex News Gun client
- Open your Forex News Gun client ( and ) and click 'Connect...'.​
- Drag the FNG window aside in order to make trade terminal's Buy and Sell buttons visible.​

3. Set a click
- Click the 'Set Click' button in the row of Canada Ivey PMI.​
- Double click on first row's 'Range To' cell. Type '50.5' and hit Enter.​
- Click first row's 'Click Location' button.​
- Drag the mouse cursor over the terminal's Buy button but don't click. We just show FNG where it is by pressing 'S' key while mouse cursor is over the Buy button. You will see the screen coordinates appearing in the FNG client.​
- Double click on second row's 'Range From' cell. Type '56.5' and hit Enter.​
- Drag the mouse cursor over the terminal's Sell button but don't click. Press 'S' key there to register button location in FNG client.​
- Click OK on this 'Set Clicks' window​

4. Keep trading environment intact
- Make sure that your pc, trade terminal and FNG client is running at the time of the release: Friday, September 4, 10:00am NY time.​
- Make sure that trade terminal's Buy and Sell buttons are visible at that time in order to catch screen clicks from FNG client.​

Now you have an automated news trading entry environment that will enter the market in a fraction of a second if this release figure hits the deviation. Nevertheless, don't forget to be at the PC at the time of the release in order to manage your position and to take that pips on the first spike that lasts no longer than several minutes.

I cannot tell you where to exit in relation to your entry, because entries during news vary greatly, due to different spreads, slippage, and other factors. For this reason, it’s extremely important that you review historical charts for Canada Ivey PMI, where the same deviation of at least 3.0 occurred. Click here to see such history: Canada Ivey PMI history of charts.

If the release figure doesn't hit the deviation then FNG client won't click so you can either close it or set the next release. In this case don't forget to change currency pair if needed according to the new release details. Don't be surprised if most of the releases don't trigger. This is a conservative strategy and according to my statistics only every 4th or 5th release opens a position by hitting the deviation.

You can try to make money "while you sleep" with this. To do that, set it up on stable computer or server with stable internet connection, and pre-set your stop/loss and take/profit targets with your broker. As long as the platform and FNG remain open, your trade will be executed and exited automatically.

To get even more creative with FNG, when setting up clicks, you can set up first click instantly on let’s say "Buy". Then you can set up second click with let’s say 20 minutes delay on let’s say "Sell" to automatically close your buy trade 20 minutes later. To do that, simply put 20 into the MM field next to the second click, and identify the "Sell" location. HH stands for hours. MM stands for minutes. SS stands for seconds. MS stands for milliseconds. The software will delay any click by your specified desired time parameters.

Due to so many releases not hitting the specified parameters, and due to them being released at such different time frames, being able to set it up, and leave it on auto-pilot may be attractive to some people, though it will be more risky.

⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯​
 
Last edited by a moderator:
Back
Top